|
Assuming that your satellite dish hasn't moved and gone out of alignment this is a very simple process and can be completed by following the steps below:
Step 1
Turn your digibox off at the main power supply.
Step 2
Gain safe access to your satellite dish.
Step 3
Carefully remove the original LNB ensuring that you don't disturb the angle and alignment of the mini dish. To do this you have to remove a little plastic plug from the arm that the LNB is inserted in. Once this is removed you need to remove the protective waterproof Amalgamating tape from the F-connector that is screwed onto the LNB, with that done you will be able to unscrew the F connector from the LNB and remove the LNB from the arm of the mini dish.
Step 4
Again, being very careful not to disturb the dish, insert the new LNB into the mini dish arm, screw on the F-connector and reseal with waterproof Amalgamating tape, insert the little plastic plug to ensure the LNB is secure and your done.
Note!
You may find the satellite finding kit useful should you accidentally move your Minidish, the kit can be purchased by clicking here.
|
