How do I install my new Minidish?

Installing your new Minidish is fairly simple, aligning your dish however is a little more tricky and may require a professional engineer.

Step 1
Remove yo/ur new dish from it's packaging and assemble using the instructions provided.
Step 2
Turn your digibox off at the main power supply.
Step 3
Gain safe access to your original Minidish.
Step 4
Remove the waterproof Amalgamating tape from the F-connector that attaches your Sky cable to your LNB and then unscrew the F-connector.
Step 5
Carefully remove the 4 13mm bolts that bolt the dish to your wall.
Step 6
Either re-use the original bolt holes and bolt your new Minidish in the original position or alternatively using the base bracket of the new dish as a template mark the new holes to be drilled. Once marked use a 10mm masonry drill bit and drill to a depth of 50mm and fix your new dish to the wall.
Step 7
Now you need to align your Minidish, please see the following question for instructions on how to do this.

Amstrad DRX550

Amstrad DRX890

Amstrad DRX895

Sky Quad LNB

Sky Minidish

Loftbox

Sky Splitter